LEWPLC

OMRON E3X-HD6

฿0.00

OMRON E3X-HD6

จำนวน

เหลือ 0 ชิ้น

หมวดหมู่ : siri
รหัสสินค้า : 085849

รายละเอียดสินค้า OMRON E3X-HD6

Type Standard Model for
Sensor Communications
Unit 1
NPN output E3X-HD11 E3X-HD6 E3X-HD14 E3X-HD0
PNP output E3X-HD41 E3X-HD8 E3X-HD44
Connecting method Pre-wired Wire-saving
Connector
2 M8
connector Communications
Unit connector
Light source (wavelength) Red, 4-element LED (625 nm)
Power supply voltage 12 to 24 VDC ±10%, ripple (P-P) 10% max. Supplied from the connector
through the Sensor
Communications Unit
Power
consump
tion Normal mode 720 mW max.
(Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC)
Eco ON 530 mW max.
(Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC)
Eco LO 640 mW max. (Current consumption: 26 mA max. at
24 VDC, 53 mA max.at 12 VDC) -
Control output Load power supply voltage: 26.4 VDC max., open-
collector output
Load current:
Groups of 1 to 3 Amplifier Units: 100mA max.,
Groups of 4 to 16 Amplifier Units: 20mA max.
Residual voltage:
At load current of less than 10 mA: 1 V max.,
At load current of 10 to 100 mA: 2 V max.
OFF current: 0.1 mA max. -
Protection circuits Power supply reverse polarity protection, output
short-circuit protection and output reverse
polarity protection Power supply reverse polarity
protection and output short-
circuit protection
Response
time Super-high-speed
mode (SHS) 3 NPN outputs: Operate or reset: 50 μs
PNP outputs: Operate or reset: 55 μs -
High-speed Mode
(HS) Operate or reset: 250 μs (default setting)
Standard Mode
(STND) Operate or reset: 1 ms
Giga-power Mode
(GIGA) Operate or reset: 16 ms
Maximum connectable Units 16 units with E3X-CRT: 16 units
with E3X-ECT: 30 units
Mutual interference
prevention Possible for up to 10 units (optical communications sync) 3
Auto power control (APC) Always ON
Other functions Power tuning, differential detection, DPC, timer (OFF-delay, ON-delay, or one-shot),
zero reset, resetting settings, and Eco mode
Ambient illumination
(Receiver side) Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max.
Ambient temperature range OOperating:
Groups of 1 to 2 Amplifiers: -25 to 55°C,
Groups of 3 to 10 Amplifiers: -25 to 50°C,
Groups of 11 to 16 Amplifiers: -25 to 45°C
Storage: -30 to 70°C
(with no icing or condensation) Operating:
Groups of 1 to 2 Amplifiers:
0 to 55°C,
Groups of 3 to 10 Amplifiers:
0 to 50°C,
Groups of 11 to 16 Amplifiers:
0 to 45°C,
Groups of 17 to 30 Amplifiers:
0 to 40°C
Storage: -30 to 70°C
(with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance
(destruction) 10 to 55 Hz with a 1.5-mm double amplitude for
2 hours each in X, Y, and Z directions 10 to 150 Hz with a 0.7-mm
double amplitude for 80 minutes
each in X, Y, and Z directions
Shock resistance
(destruction) 500 m/s2 for 3 times each in X, Y, and Z
directions 150 m/s2 for 3 times each in
X, Y, and Z directions
Degree of protection IEC 60529 IP50
(with Protective Cover attached) -
Weight
(packed state/unit only) Approx. 105 g/
Approx. 65 g Approx. 60 g/
Approx. 20 g Approx. 70 g/
Approx. 25 g Approx. 65 g/Approx. 25 g
Materials Case Polycarbonate (PC) Heat-resistant ABS
(connector: PBT)
Cover Polycarbonate (PC)
Cable PVC -
Accessories Instruction Manual

Type	Standard	Model for Sensor Communications Unit *1
NPN output	E3X-HD11	E3X-HD6	E3X-HD14	E3X-HD0
PNP output	E3X-HD41	E3X-HD8	E3X-HD44
Connecting method	Pre-wired	Wire-saving Connector *2	M8 connector	Communications Unit connector
Light source (wavelength)	Red, 4-element LED (625 nm)
Power supply voltage	12 to 24 VDC ±10%, ripple (P-P) 10% max.	Supplied from the connector through the Sensor Communications Unit
Power consump tion	Normal mode	720 mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC)
Eco ON	530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC)
Eco LO	640 mW max. (Current consumption: 26 mA max. at 24 VDC, 53 mA max.at 12 VDC)	-
Control output	Load power supply voltage: 26.4 VDC max., open- collector output Load current: Groups of 1 to 3 Amplifier Units: 100mA max., Groups of 4 to 16 Amplifier Units: 20mA max. Residual voltage: At load current of less than 10 mA: 1 V max., At load current of 10 to 100 mA: 2 V max. OFF current: 0.1 mA max.	-
Protection circuits	Power supply reverse polarity protection, output short-circuit protection and output reverse polarity protection	Power supply reverse polarity protection and output short- circuit protection
Response time	Super-high-speed mode (SHS) *3	NPN outputs: Operate or reset: 50 μs PNP outputs: Operate or reset: 55 μs	-
High-speed Mode (HS)	Operate or reset: 250 μs (default setting)
Standard Mode (STND)	Operate or reset: 1 ms
Giga-power Mode (GIGA)	Operate or reset: 16 ms
Maximum connectable Units	16 units	with E3X-CRT: 16 units with E3X-ECT: 30 units
Mutual interference prevention	Possible for up to 10 units (optical communications sync) *3
Auto power control (APC)	Always ON
Other functions	Power tuning, differential detection, DPC, timer (OFF-delay, ON-delay, or one-shot), zero reset, resetting settings, and Eco mode
Ambient illumination (Receiver side)	Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max.
Ambient temperature range	OOperating: Groups of 1 to 2 Amplifiers: -25 to 55°C, Groups of 3 to 10 Amplifiers: -25 to 50°C, Groups of 11 to 16 Amplifiers: -25 to 45°C Storage: -30 to 70°C (with no icing or condensation)	Operating: Groups of 1 to 2 Amplifiers: 0 to 55°C, Groups of 3 to 10 Amplifiers: 0 to 50°C, Groups of 11 to 16 Amplifiers: 0 to 45°C, Groups of 17 to 30 Amplifiers: 0 to 40°C Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance (destruction)	10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions	10 to 150 Hz with a 0.7-mm double amplitude for 80 minutes each in X, Y, and Z directions
Shock resistance (destruction)	500 m/s2 for 3 times each in X, Y, and Z directions	150 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC 60529 IP50 (with Protective Cover attached)	-
Weight (packed state/unit only)	Approx. 105 g/ Approx. 65 g	Approx. 60 g/ Approx. 20 g	Approx. 70 g/ Approx. 25 g	Approx. 65 g/Approx. 25 g
Materials	Case	Polycarbonate (PC)	Heat-resistant ABS (connector: PBT)
Cover	Polycarbonate (PC)
Cable	PVC	-
Accessories	Instruction Manual