LEWPLC

Fluke 753 Documenting Process Calibrator ราคา 331,199 บาท

฿331199.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Fluke
รหัสสินค้า : 060802

รายละเอียดสินค้า Fluke 753 Documenting Process Calibrator ราคา 331,199 บาท

Fluke 753 Specifications

Measurement Accuracy
Voltage DC	Range/resolution: 100 mV, 3 V, 30 V, 300 V 1 year: 0.02% + 0.005 mV, 0.02% + 0.00005 V, 0.02% + 0.0005 V, 0.05% + 0.05 V 2 years: 0.03% + 0.005 mV, 0.03% + 0.00005 V, 0.03% + 0.0005 V, 0.07% + 0.05 V
Voltage AC	Range/resolution: 3 (40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V 1 year: 0.5% + 0.002 V, 0.5% + 0.02 V, 0.5% + 0.2 V 2 years: 1.0% + 0.004 V, 1.0% + 0.04 V, 1.0% + 0.2 V
Current DC	Range/resolution: 30 mA, 110 mA 1 year: 0.01% + 5 µA, 0.01% + 20 µA 2 years: 0.015% + 7 µA, 0.015% + 30 µA
Resistance	Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ 1 year: 0.05% + 50 mΩ, 0.05% + 50 mΩ, 0.05% + 500 mΩ, 0.1% + 10 Ω 2 years: 0.07% + 70 mΩ, 0.07% + 70 mΩ, 0.07% + 0.5 Ω, 0.15% + 15 Ω
Frequency	Range/resolution: 1.00 to 110.00 Hz/0.01 Hz, 110.1 to 1100.0 Hz/0.1 Hz, 1.101 to 11.000 kHz/0.001 kHz, 11.01 to 50.00 kHz/0.01 kHz 2 years: 0.05 Hz, 0.5 Hz, 0.005 kHz, 0.05 kHz
Source Accuracy
Voltage DC	Range/resolution: 100 mV, 1 V, 15 V 1 year: 0.01% + 0.005 mV, 0.01% + 0.00005 V, 0.01% + 0.0005 V 2 years: 0.015% + 0.005 mV, 0.015% + 0.0005 V, 0.015% + 0.0005 V
Current DC	Range/resolution: 22 mA (source), current sink (simulate) 1 year: 0.01% + 0.003 mA, 0.02% + 0.007 mA 2 years: 0.02% + 0.003 mA, 0.04% + 0.007 mA
Resistance	Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ 1 year: 0.01% + 10 mΩ, 0.01% + 20 mΩ, 0.02% + 0.2 Ω, 0.02% + 3 Ω 2 years: 0.015% + 15 mΩ, 0.015% + 30 mΩ, 0.03% + 0.3 Ω, 0.03% + 5 Ω
Frequency	Range/resolution: 0.1 to 10.99 Hz, 0.01 to 10.99 Hz, 11.00 to 109.99 Hz, 110.0 to 1099.9 Hz, 1.100 to 21.999 kHz, 22.000 to 50.000 kHz 2 years: 0.01 Hz, 0.01 Hz, 0.1 Hz, 0.1 Hz, 0.002 kHz, 0.005 kHz
Technical Data
Data Log Functions	Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
Ramp Functions	Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
Loop Power Function	Voltage: Selectable, 26 V Accuracy: 10%, 18 V minimum at 22 mA Maximum current: 25 mA, short circuit protected Maximum input voltage: 50 V DC
Step Functions	Source functions: Voltage, current, resistance, frequency, temperature Manual step: Selectable step, change with arrow buttons Autostep: Fully programmable for function, start delay, step value, time per step, repeat
Environmental Specifications
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	-4 to 140°F (-20 to 60°C)
Dust/Water Resistance	Meets IP52, IEC 529
Operating Altitude	9842' (3000 m) above mean sea level
Mechanical and General Specifications
Batteries	Internal battery pack Li-ion: 7.2 V, 4400 mAh, 30 Wh
Battery Life	>8 hours typical
Battery Replacement	Via snap-shut door without opening calibrator; no tools required
Side Port Connections	Pressure module connector USB Connector to interface to your PC Connection for optional battery charger/eliminator
Data Storage Capacity	1 week of calibration procedures results
90 Day Specifications	The standard specification interval are 1 and 2 years Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.
Dimensions	5.4 x 9.6 x 2.5" (136 x 245 x 63 mm)
Weight	2.7 lbs (1.2 kg)
Safety Specifications
Agency Approvals	CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993