LEWPLC

Fluke 190-062-III-S Color ScopeMeter with FlukeView-2 software package, 60 MHz, 2 channels ราคา 191,

฿191834.00

Fluke 190-062-III-S Color ScopeMeter with FlukeView-2 software package, 60 MHz, 2 channels ราคา 191,834 บาท

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Fluke
รหัสสินค้า : 059450

รายละเอียดสินค้า Fluke 190-062-III-S Color ScopeMeter with FlukeView-2 software package, 60 MHz, 2 channels ราคา 191,

Fluke 190-062-III-S Specifications

Vertical Deflection
Number of Channels	2
Bandwidth	60 Mhz
Rise Time	5.8 ns
Channel Architecture	All inputs fully insulated from each other and from ground Inputs may be activated in any combination
Input Coupling	AC or DC, with ground level indicator
Input Sensitivity	With 10:1 probe, 20 mV to 1000 V/div With 100:1 probe, 200 mV to 10 kV/div Direct (1:1), 2 mV to 100 V/div
Bandwidth Limiter	20 MHz and 10 kHz
Polarity	Normal, inverted, variable
Vertical Resolution	8 bit
Accuracy at 4 s to 10 μs/div	5 mV/div to 100 V/div, ±(1.5% + 6 counts) 2 mV/div, ±(1.5 % + 10 counts)
Input impedance	1 MΩ (±1 %) // 15 pF (±2.25 pF)
Input Voltage Range
Rated Maximum Floating Voltage	CAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level)
Probe Input Voltage VPS410-II	CAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead)
Probe Input Voltage VPS421	CAT III 1000 V / CAT IV 600 V (maximum voltage between probe tip or reference lead to GND, 2000 V max between probe tip and reference lead)
Maximum BNC Input Voltage	CAT IV 300 V (maximum voltage on BNC input directly)
Memory Save and Recall
Memory Locations (Internal)	30 waveform memories plus 10 recording memories plus 9 screen copy memories
30 Waveform Memories	Each memory can contain up to 2 or 4 waveforms plus corresponding setups
10 Recording Memories	Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
External Data Storage	On PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
Screencopies	On PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
Volatility	Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
Real-Time Clock	Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Case
Design	Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard Kensington lock supported to lock down instrument when left unattended
Drip and Dust Proof	IP 51 according to IEC60529
Shock and Vibration	Shock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (Random), according to MIL-PRF-28800F Class 2
Display Size	5.3 x 3.5" (133 x 90 mm) LCD
Resolution	1120 pixels x 765 pixels
Brightness	User-adjustable, up to 300 cd/m2
General Specifications
Temperature	Operating: battery discharging: 32 to 104°F (0 to 40°C); battery charging: 0 to 40°C (32 to 104°F) Storage: -4 to 140°F (-20 to 60°C)
Humidity	32 to 50°F (0 to 10°C): noncondensing 50 to 86°F (10 to 30°C): 95% (±5%) 86 to 104°F (30 to 40°C): 75% (±5%) 104 to 122°F (40 to 50°C): 45% (±5%)
Maximum Operating Altitude	CAT IV 600 V, CAT III 1000 V: up to 6600’ (2000 m) CAT IV 300 V, CAT III 600 V, CAT II 1000 V: up to 13000’ (4000 m)
Maximum Storage Altitude	40,000’ (12 km)
Interfaces	Two USB-ports provided Ports are fully insulated from instrument’s floating measurement circuitry USB-host port directly connects to external flash memory drive (up to 32 GB) for storage of waveform data, measurement results, instrument settings and screen copies Alternatively, this USB-A port may be used to connect a WiFi Adapter for wireless PC connectivity A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
Probe Calibration Output	Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel Generator Output: 1.225 Vpp / 500 Hz square wave
Line Power	Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100 VAC to 240 VAC, ±10%, 50 to 60 Hz
Battery	Power: re-chargeable Li-Ion battery; battery swappable through easily accessible battery door at the rear of the instrument Type: BP291: 10.8V, 5000 mAh Charge indicator: battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen Operating time (with backlight low): Up to 7 hours using BP291 (included) Charging time: five hours for BP291 Power saving functions: Auto ‘power down’ with adjustable power down time; automatic ‘display off’ with adjustable power down time; on-screen battery power indicator
Dimensions	10.5 x 7.6 x 2.8" (265 x 192 x 70 mm)
Weight	4.8 lbs (2.2 kg)