LEWPLC

Fluke 1734/EUS Three Phase Electrical Energy Logger, WiFi with current probes ราคา 181,799 บาท

฿181799.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Fluke
รหัสสินค้า : 059275

รายละเอียดสินค้า Fluke 1734/EUS Three Phase Electrical Energy Logger, WiFi with current probes ราคา 181,799 บาท

Fluke 1734/EUS Specifications

Voltage
Range	1000 V
Maximum Resolution	0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(0.2% + 0.01%)
i17xx-Flex 1500 12"
Range	150 A 1500 A
Maximum Resolution	0.1 A 1 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(1% + 0.02%) ±(1% + 0.02%)
i17xx-flex 3000 24"
Range	300 A 3000 A
Maximum Resolution	1 A 10 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(1% + 0.03%) ±(1% + 0.03%)
i17xx-flex 6000 36"
Range	600 A 6000 A
Maximum Resolution	1 A 10 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(.51% + 0.03%) ±(1.5% + 0.03%)
i40s-EL Clamp
Range	4 A 40 A
Maximum Resolution	1 mA 10 mA
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(0.7% + 0.02%) ±(0.7% + 0.02%)
Frequency
Range	42.5 to 69 Hz
Maximum Resolution	0.01 Hz
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(0.1%)
Aux Input
Range	±10 V DC
Maximum Resolution	0.1 mV
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(0.2% + 0.02%)
Voltage Min/Max
Range	1000 V
Maximum Resolution	0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(1% + 0.1%)
Current Min/Max
Range	Defined by accessory
Maximum Resolution	Defined by accessory
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±(5% + 0.2%)
THD on Voltage
Range	1000%
Maximum Resolution	0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±0.5
THD on Current
Range	1000%
Maximum Resolution	0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)	±0.5
Active Power P Active Energy Ea
Influence Quantity	PF ≥0.99
Apparent Power S Active Energy Eap
Influence Quantity	0 ≤PF ≤1
Reactive Power Q Reactive Energy Er
Influence Quantity	0 ≤PF ≤1
Additional Uncertainty in % of Range
Influence Quantity	VP-N <250 V
Power Supply
Voltage Range	100 to 500 V using safety plug input when powering from the measurement circuit 100 to 240 V using standard power cord (IEC 60320 C7)
Power Consumption	Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Efficiency	>68.2% (in accordance with energy efficiency regulations)
Maximum No-Load Consumption	<0.3 W only when powered using IEC 60320 input
Mains Power Frequency	50/60 Hz ± 15%
Battery	Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-Battery Runtime	Four hours in standard operating mode, up to 5.5 hours in power saving mode
Charging Time	<6 hours
Data Acquisition
Resolution	16-bit synchronous sampling
Sampling Frequency	10.24 kHz at 50/60 Hz, synchronized to mains frequency
Input Signal Frequency	50/60 Hz (42.5 to 69 Hz)
Circuit Types	1-ϕ, 1-ϕ IT, split phase, 3-ϕ delta, 3-ϕ wye, 3-ϕ wye IT, 3-ϕ wye balanced, 3-ϕ Aron/Blondel (2-element delta), 3-ϕ delta open leg, currents only (load studies)
Data Storage	Internal flash memory (not user replaceable)
Memory Size	Typical 10 logging sessions of 8 weeks with 1-minute intervals and 500 events
Basic Interval
Measured Parameters	Voltage, current, aux, frequency, THD V, THD A, power, power factor, fundamental power, DPF, energy
Averaging Interval	User selectable: 1, 5, 10, 30 sec, 1, 5, 10, 15, 30 min
Averaging Time Min/Max Values	Voltage, Current: Full cycle RMS updated every half cycle Aux, Power: 200 ms
Demand Interval (Energy Meter Mode)
Measured Parameters	Energy (Wh, varh, VAh), PF, maximum demand, cost of energy
Interval	User selectable: 5, 10, 15, 20, 30 min, off
Interfaces
USB-A	File transfer via USB flash drive, firmware updates, max. supply current: 120 mA
WiFi	File transfer and remote control via direct connection or WiFi infrastructure
Bluetooth	Read auxiliary measurement data from Fluke Connect® 3000 series modules
USB-Mini	Data download device to PC
Voltage Inputs
Number of Inputs	4 (3 phases and neutral)
Maximum Input Voltage	1000 V RMS, CF 1.7
Input Impedance	10 MΩ
Bandwidth	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Measurement Category	1000 V CAT III/600 V CAT IV
Current Inputs
Number of Inputs	3, mode selected automatically for attached sensor
Input Voltage	Clamp input: 500/50 mV rms; CF 2.8
Rogowski Coil Input	150/15 mV rms at 50 Hz 180/18 mV rms at 60 Hz CF 4 All at nominal probe range
Range	1 to 150 A, 10 to 1500 A with thin flexible current probe i17XX-flex1500 12" 3 to 300 A, 30 to 3000 A with thin flexible current probe i17XX-flex3000 24" 6 to 600 A, 60 to 6000 A with thin flexible current probe i17XX-flex6000 36" 40 mA to 4 A, 0.4 to 40 A with 40 A clamp i40s-EL
Bandwidth	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Auxiliary Inputs
Number of Inputs	2
Input Range	0 to ±10 V DC, 1 reading/s
Scale Factor	Format: mx + b (gain and offset) user configurable
Displayed Units	User configurable (7 characters, for example, °C, psi, or m/s)
Wireless Connection
Number of Inputs	2
Supported Modules	Fluke Connect® 3000 series
Acquisition	1 reading/s
Environmental Specifications
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	−4 to 140°F (-20 to 60°C) With battery: −4 to 122°F (-20 to 50°C)
Operating Humidity	50 to 86°F (10 to 30°C) max. 95% RH 86 to 104°F (30 to 40°C) max. 75% RH 104 to 122°F (40 to 50°C) max. 45% RH
Operating Altitude	6561.7' (2000 m) up to 13,123.4' (4000 m) derate to 1000 V CAT II/600 V CAT III/300 V CAT IV
Storage Altitude	39,370.1' (12,000 m)
Enclosure	IP50 in accordance with EN60529
Vibration	MIL-T-28800E, Type 3, Class III, Style B
Safety	IEC 61010-1 IEC Mains Input: Overvoltage Category II, Pollution Degree 2 Voltage Terminals: Overvoltage Category IV, Pollution Degree 2 IEC 61010-2-031: CAT IV 600 V/CAT III 1000 V
Electromagnetic Compatibility (EMC)	EN 61326-1: Industrial CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (industrial broadcasting and communication equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Temperature Coefficient	0.1 x accuracy specification/°C
General Specifications
Color LCD Display	4.3" (109.2 mm) active matrix TFT, 480 x 272 pixels, resistive touch panel
Dimensions	Instrument: 7.8 x 6.6 x 2.2" (19.8 x 16.7 x 5.5 cm) Power supply: 5.1 x 5.1 x 1.8" (13 x 13 x 4.5 cm)
Weight	Instrument: 2.5 lbs (1.1 kg) Power supply: 0.9 lb (400 g)