LEWPLC

FLUKE 1760

฿798327.00
FLUKE 1760
เหลือ 0 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : FLUKE
  • รหัสสินค้า : 011559

รายละเอียดสินค้า FLUKE 1760

Statistical Evaluation
   Power quality statistics according to EN50160 and DISDIP tables like ITIC, CEBEMA, ANSI
Event List
   Dips, swells and interruptions are detected and stored in the event list. Also any trigger which fires generates an event added to this list.
   The Event list shows the exact time when the event occurred as well as the duration and magnitude. Sorting by several attributes of these events is possible to select one for further root cause analysis.
   RMS values, transients and fast transients can be stored if a trigger fires.
Continuous Recording
   Fluke 1760 records rms values together with corresponding minimum and maximum values for:
   • Voltage
   • Current
   • Power P, Q, S
   • Power Factor
   • kWh
   • Flicker
   • Unbalance
   • Frequency
   • Harmonics/Interharmonics
   continuously with the following time aggregations:
   Day
   10 min
   Free Interval, e.g.: 15 min, 2h
Triggered Recordings
rms:  Aggregation time is adjustable between 10 ms (1/2 cycle), 20ms (1 cycle), 200ms (10/12 cycles) or 3 sec (150/180 cycles).
   Calculating rms values, Harmonics and Interharmonics is performed synchronous to the power frequency.
   Basic aggregation for harmonics and interharmonics is 200ms
Oscilloscope:  Sample rate is 10.24 kHz for all 8 channels
Fast Transients:  Sample rate is selectable from 100 kHz to 10 MHz for channel 1-4 FFT of Fast Transients
Mains Signalling
   Phases and N-conductor, Voltage and current
Online Mode
   Variable refresh rate. This feature allows verification of instrument set up and delivers a quick overview of oscilloscope, transients and events.

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 17/04/2554
ปรับปรุงเว็บเมื่อ : 14/10/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 517084

หมวดหมู่