E2E-X20MD1 OMRON ราคา 2,100 บาท
- หมวดหมู่ : stock jay
- รหัสสินค้า : 007449
รายละเอียดสินค้า E2E-X20MD1 OMRON ราคา 2,100 บาท
Cylinder type sensing head sizeM30TypeUnshieldedSensing methodInductive typeSensing distance20 mm -10% to +10%Setting distance0 to 16 mmDifferential distance10% Max. of sensing distanceSensing objectFerrous metal (Sensitivity lowers with non-ferrous metals.)Standard sensing objectIron 54*54*1mmResponse frequencyDC: 0.1 kHz (average)Power supply voltage12 to 24 VDC ripple(p-p) :10% Max.Operating voltage range10 to 30 VDCLeakage current0.8 mA Max.Control output (Output type)DC 2-wire models with polarityControl outpu (Switching capacity)3 to 100 mAControl outpu (Residual voltage)3 V Max. （under load current with cable length of 2m）IndicatorOperation indicator(red), Operation setting indicator(green)Operation modeNOProtective circuitSurge suppressor
Output short-cut protectionAmbient temperatureOperating: -25 to 70 ℃
Storage: -40 to 85 ℃
(with no icing or condensation)Ambient humidityOperating: 35 to 95% RH
Storage: 35 to 95% RH
(with no condensation)Temperature influence+/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL
(As the basis for sensing distance of 23CEL)Voltage influence+/- 1% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage)Insulation resistance50 M OHM Min. at 500VDC between charged parts and the caseDielectric strength1000 VAC 50/60 Hz for 1 minute between charged parts and the caseVibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directionsShock resistance1000m/s2 for 10 times each in X, Y, and Z directionsDegree of protectionIEC60529: IP67Applicable standard (EC Directive (Low Voltage Directive) )EN60947-1
EN60947-5-2Applicable standard (EC Directive (EMC))EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: EquippedApplicable standard (CCC mark)Not equippedConnection methodM12 connector modelsWeight (Packed state)approx. 90 gMaterial (case)Brass nickel platingMaterial (sensing surface)PBTMaterial (clamping nuts)Brass nickel platingMaterial (toothed washer)Iron zinc platingAccessoriesInstruction manual
รีวิว (2)
เพิ่มรีวิว
