LEWPLC

E3S-CL2 OMRON ราคา 3800 บาท

฿3800.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : stock jay
รหัสสินค้า : 007184

รายละเอียดสินค้า E3S-CL2 OMRON ราคา 3800 บาท


Sensing method	Distance-setting
Sensing distance	5 mm to 500 mm (White paper 200*200mm)
Setting range	50 to 500mm (White paper 200*200mm)
Differential distance	10% Max. of setting distance
Reflectivity characteristic (black-white error)	10% Max. of setting distance
Light source	Infrared LED (Emission wave length: 860nm)
Power supply voltage	10 to 30 VDC (ripple(p-p) 10% included)
Current consumption	50mA DC Max.
Control output (Output type)	NPN/PNP open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention
Response time	2ms Max.
Sensitivity setting	6-turn endless adjustment (with indicator)
Ambient illuminance	Incandescent lamp:5000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: -25 to 55 ℃ Storage: -25 to 55 ℃ (with no icing or condensation)
Ambient humidity	Operating: 35 to 85%RH Storage: 35 to 85%RH (with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67 Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC))	EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4
Conformed standard （EC Directive （CE marking））	Equipped
Connection method	Pre-wired models (Cable length: 5 m)
Indicator	Light indicator(orange), Stability indicator(green)
Weight (packed state)	Approx. 250 g
Tightening torque	1.2 N.mMax. （with M4 screw）
Material (case)	Zinc diecast
Material (lens)	Methacrylate resin
Material (cover)	Polyethyl sulfon
Material (mounting bracket)	Stainless steel(SUS304)
Accessories	Instruction manual, Mounting bracket, Adjustment driver, Hexagon bolt M4*12(with Spring washers, Flat washers)