LEWPLC

GP-3400T Model: AGP3400-T1-D24 PROFACE

฿0.00
GP-3400T<br>
Model: AGP3400-T1-D24
เหลือ 0 ชิ้น
  • หมวดหมู่ : PROFACE
  • รหัสสินค้า : 003670

รายละเอียดสินค้า GP-3400T Model: AGP3400-T1-D24 PROFACE

GP-3400T Model: AGP3400-T1-D24 PROFACE

Functional Specification

Display Type TFT Color LCD
Display Size 7.5"
Resolution 640 X 480 pixels (VGA)
Dot pitch W0.237 x H0.237 mm [W0.01 x H0.01 in.]
Effective Display Area W153.7 X H115.8mm [W6.05 X H4.56in.]
Display Colors 65,536 Colors (No blink)/16,384 Colors (Blink)
Backlight CCFL (User nonreplaceable parts, return system to distributor.)
Brightness Control 8 Levels (Adjusted with the touch panel)
Contrast Control Not applicable
Backlight Service Life 54,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Language Fonts Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes Standard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times.*1
Text 8 x 8 dots 80 char. X 60 rows
8 x 16 dots 80 char. X 30 rows
16 x 16 dots 40 char. X 30 rows
32 x 32 dots 20 char. X 15 rows
Control Memory Variable Area SRAM 64 KB (uses lithium battery)*2
Program Area FLASH EPROM 132 KB
Number of Step Equivalent to 15,000 steps*3
Application Memory FLASH EPROM 16 MB*4
Data Backup SRAM 320KB (uses lithium battery)*2
Clock Accuracy ±65 sec./month (deviation at room temperature and power is OFF)*5
Touch Panel Type Resistive Film (analog)
Touch Panel Resolution 1,024 X 1,024
Touch Panel Service Life 1,000,000 times or more
Interface Serial (COM1) RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
Serial (COM2) RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (socket)
Ethernet (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45)×1
Expansion Unit 1 Communication Expansion Unit x 1
USB (TYPE-A) Conforms to USB1.1. (TYPE-A conn.) X 1, Power Supply Voltage: DC5V±5%, Output Current: 500mA (max.), Communication Distance: 5m (max.)
Expansion Memory Function Expansion Memory x 1 (on internal circuit board)
CF Card Compact Flash CF Card Slot (TYPE-II) X 1
Sound Output Speaker Output, 70mW (Rated Load: 8Ω, Frequency: 1kHz), Connector: 2-piece terminal block (AUX) X 1
AUX Input/Output Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, Remote Reset Input, Input Voltage: DC24V, Connector: 2-piece terminal block (AUX) X 1
  1. Other font sizes can be set up with the Editor software.
  2. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is 40 oC or less.
    4.1 years when the battery's ambient temperature is 50 oC or less.
    1.5 years when the battery's ambient temperature is 60 oC or less.
    When used for back up: Approximately 100 days, with a fully charged battery.
    Approximately 6 days, with a half-charged battery.
  3. Up to 60,000 steps can be converted in software. However, this reduces internal memory capacity (for screen data) by 1 MB.
  4. Capacity available for user application. 8 MB available if the revision of the unit is earlier than Rev. 4, or GP-Pro EX Ver. 2.5 or earlier is used.
  5. Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
Page Top

General Specification

International Safety Standards
Rated Input Voltage DC24V
Input Voltage Limits DC19.2 to 28.8V
Allowable Voltage Drop 10ms (max.)
Power Consumption 28W (max.)
In-Rush Current 30A (max.)
Voltage Endurance AC1,000V 20mA for 1 minute, (between charging and FG terminals)
Insulation Resistance DC500V 10MΩ (min.), (between charging and FG terminals)
Surrounding Air Temperature 0 to 50 ℃
Storage Temperature -20 to +60℃
Ambient Humidity 10 to 90% RH (Wet bulb temperature: 39℃ max. - no condensation.)
Storage Humidity 10 to 90% RH (Wet bulb temperature: 39℃ max. - no condensation.)
Dust 0.1mg/m³ and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure (altitude range) 800 to 1,114hPa (2,000 meters max.)
Vibration Resistance IEC/EN61131-2 compliant, 5 to 9Hz Single amplitude 3.5mm [0.14in.], 9 to 150Hz Fixed acceleration: 9.8m/s², X,Y,Z directions for 10 cycles (100 minutes)
Concussion Resistance IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
Electrostatic Discharge Immunity Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3)
Grounding Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure Equivalent to IP65f NEMA #250 TYPE 4X/13 (Front surface of embedded panel)*6
Installation Configuration Embedded panel
Cooling Method Natural air circulation
Weight Approx. 1.8kg [4.0lb] max. (unit only)
External Dimensions W215 X H170 X D60mm , [W8.46 X H6.69 X D2.36in.]
Panel Cut Dimensions W204.5 x H159.5 mm [W8.05 x H6.28 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*7
  1. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.
  2. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 17/04/2554
ปรับปรุงเว็บเมื่อ : 14/10/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 517084

หมวดหมู่