LEWPLC

FN-xx04AH11 PROFACE

฿0.00
FN-xx04AH11 PROFACE
เหลือ 0 ชิ้น
  • หมวดหมู่ : PROFACE
  • รหัสสินค้า : 003656

รายละเอียดสินค้า FN-xx04AH11 PROFACE

FN-xx04AH11 PROFACE

Functional Specifications

Specification

FN-xx04AH11

-> Replacement Comparison of 2-channel analog input/output units
Model No.

FN-AD04AH11

FN-DA04AH11
Electrical Rated Voltage DC24V
Rated Voltage Range DC20.4 to DC28.8V
Allowable Voltage Drop 10ms or less (Power supply: DC24V)
Power Consumption 4.8W or less 7.2W or less
Voltage Endurance AC1500V, 10mA for up to 1minute 
(between power/ Input and Output, and FG terminals), 
AC500V for up to 1minute 
(between primary and secondary power supplies)
In-rush Current 30A or less
Insulation Resistance 10MΩ or more at DC500V
(between charging and FG terminals)
Environmental Ambient 
Operating 
Temperature		 0℃ to 55℃
Storage 
Temperature		 -25℃ to 70℃
Ambient Humidity 30 to 90% RH 
(Wet bulb temperature 39℃ or less. Non-condensing)
Storage Humidity 30 to 90% RH 
(Wet bulb temperature 39℃ or less. Non-condensing)
Protecting Rating IP30
Structural Mounting Method 35-mm DIN track or screw mounting
External Dimensions W168mm[6.61in.] × H50mm[1.97in.] × D50mm[1.97in.]
Input/Output Resolution 12 bit
Output/Input Channels 4ch (fixed)
Conversion Time 2ms or less/channel
Input/ Output 
Range Switch		 Depends on rotary switch settings
Input/Output 
Range		 Voltage 0 to 5V
(impedance 1MΩ)		 0 to 5V
(impedance 1kΩ)
1 to 5V
(impedance 1MΩ)		 1 to 5V
(impedance 1kΩ)
0 to 10V
(impedance 1MΩ)		 0 to 10V
(impedance 1kΩ)
-5 to 5V
(impedance 1MΩ)		 -5 to 5V
(impedance 1kΩ)
-10 to 10V 
(impedance 1MΩ)		 -10 to 10V
(impedance 1kΩ)
Current 0 to 20mA
(impedance 200Ω)		 0 to 20mA
(impedance 400Ω)*1
4 to 20mA
(impedance 200Ω)		 4 to 20mA
(impedance 400Ω)*1
Accuracy 0.3%/FS (25℃), 0.5%/FS ( 0 to 55℃)
Insulation Method input terminals/ between internal circuits: Photocoupler Insulation between output terminal and internal circuit: Photocoupler isolation
Processing
(after conversion)		 Simple Average, Running average
(Exclude max./min. values)		 -
Conversion Timing Simultaneous
(all channnels, not selectable)
Calibration Function Offset, Gain settig
Setting the upper limit value/ lower limit value for each range via switch
  1. For continuous output to 4 channels at the same time with FN-DA04AH11, the output current for 1 channel should be 10mA or less. Or, the total current of all channels should be 40mA or less.
Page Top

Input/Output Circuit Diagrams

Input Circuit Diagrams (FN-AD04AH11)

Input Circuit Diagrams (FN-AD04AH11)

Output Circuit Diagrams (FN-DA04AH11)

Output Circuit Diagrams (FN-DA04AH11)

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 17/04/2554
ปรับปรุงเว็บเมื่อ : 14/10/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 517084

หมวดหมู่