LEWPLC

FN-XY32SKS41 PROFACE

฿0.00
FN-XY32SKS41 PROFACE
เหลือ 0 ชิ้น
  • หมวดหมู่ : PROFACE
  • รหัสสินค้า : 003655

รายละเอียดสินค้า FN-XY32SKS41 PROFACE

FN-XY32SKS41 PROFACE

Functional Specifications

Item Specification
Model No. FN-XY32SKS41
Electrical Rated Voltage DC24V
Rated Voltage Range DC20.4 to DC28.8V
Allowable Voltage Interruption 10ms or less (Power supply: DC24V)
Power Consumption 3.5W or less
Voltage Endurance AC500V, 10mA for up to 1minute
(between power/ Input and Output, and FG terminals)
Insulation Registance 10MΩ or more at DC500V 
(between power/ Input and Output, and FG terminals)
In-rush Current 15A or less
Environmental Operating Temperature 0℃ to 55℃
Storage Temperature -25 to 70℃
Operating Humidity 5 to 95% RH 
(Wet bulb temperature 39℃ or less. Non-condensing)
Storage Humidity 5 to 95% RH 
(Wet bulb temperature 39℃ or less. Non-condensing)
Air Purity (Dust) 0.1mg/m3 or less (non-conductive levels)
Pollution Degree Pollution Degree 2
Protection Rating IP20 (Without terminal block)
Input/Output Rated Input Voltage DC24V
Max. Input Voltage DC28.8V
No. of Input Points 32 points (sink type)
No. of Common 2
Input ON Voltage DC15V or higher
Input OFF Voltage DC5V or less
Input Impedance 4.2kΩ
Input Delay Time OFF-ON 1.5ms or less
ON-OFF 1.5ms or less
Rated Output Voltage DC24V
Rated Output Voltage Range DC20.4 to DC28.8V
No. of Output Points 32 points (sink type)
No. of Common 2
Maximum Load Voltage 0.2A/point
(16 points/common, max. common current :1.6A)
Isolation Method Photocoupler isolation
Output Protection None
Built-in Fuse 3.5A, DC125V buit-in Chip Fuse
(cannot be replaced)
Voltage Drop (ON Voltage) DC1.5V or less
Clamp Voltage DC39V ±1V
Current Leakage 0.1mA or less
Output Delay Time OFF-ON 1ms or less
ON-OFF 1ms or less
Occupied Node Number 2

Input/Output Circuit Diagrams

Input/Output Circuit Diagrams
  1. Dotted line shows the source output connection.
  2. For IN0 to IN15, use COM1. For IN16 to IN31, use COM2 as the input common.
  3. For OUT0 to OUT15, connect the output power to V1+/V1-. For OUT16 to OUT31, connect the output power to V2+/V2-.