GP-3200A Model: AGP3200-A1-D24

Model: AGP3200-A1-D24
เหลือ 0 ชิ้น
  • หมวดหมู่ : PROFACE
  • รหัสสินค้า : 003510

รายละเอียดสินค้า GP-3200A Model: AGP3200-A1-D24

Functional Specification

Display Type Monochrome Amber/Red LCD
Display Size 3.8"
Resolution 320 x 240 pixels (QVGA)
Dot pitch W0.24 x H0.24 mm [W0.01 x H0.01 in.]
Effective Display Area W78.8 x H59.6 mm [W3.10 x H2.35 in.]
Display Colors Monochrome (8 Levels)
Backlight Amber/Red LED (User nonreplaceable parts. Factory replacement required.)
Brightness Control 16 Levels (Adjusted with the touch panel)
Contrast Control 8 Levels (Adjusted with the touch panel)
Backlight Service Life 50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50%)
Language Fonts Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts Stroke font: 6 to 127 pixel fonts Image font: 8 to 72 pixel fonts
Font Sizes Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
Text 8 x 8 dots 40 char. x 30 rows
8 x 16 dots 40 char. x 15 rows
16 x 16 dots 20 char. x 15 rows
32 x 32 dots 10 char. x 7 rows
Application Memory FLASH EPROM 6 MB*2
Data Backup SRAM 320KB (uses lithium battery)*3
Clock Accuracy ±65 sec/month (deviation at room temperature and power is OFF)*4
Touch Panel Type Resistive Film (analog)
Touch Panel Resolution 1,024 x 1,024
Touch Panel Service Life 1,000,000 times or more
Interface Serial (COM1) RS-232C/422/485 Asynchronous Transmission Data Length: 7 or 8 bit Parity: none, Even or Odd Stop Bit: 1 or 2 bit Data Transmission Speed: 2,400 bps to 115.2 kbps Connector: D-Sub9 (plug)
Ethernet (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular jack (RJ-45) x 1
USB (TYPE-A) Conforms to USB1.1 (TYPE-A) x 1 Power Supply Voltage: DC 5 V ±5 % Output Current: 500 mA or less Communication Distance: 5 m or less
  1. Other font sizes can be set up with the Editor software.
  2. Capacity available for user application.
  3. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is 40 oC or less.
    4.1 years when the battery's ambient temperature is 50 oC or less.
    1.5 years when the battery's ambient temperature is 60 oC or less.
    When used for back up: Approximately 100 days, with a fully charged battery.
    Approximately 6 days, with a half-charged battery.
  4. Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

General Specification

International Safety Standards
Rated Input Voltage DC 24 V
Input Voltage Limits DC 19.2 to 28.8 V
Allowable Voltage Drop 2 ms or less
Power Consumption 13 W or less
In-Rush Current 60 A or less
Voltage Endurance AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature 0 to 50 ℃*5
Storage Temperature -20 to +60 ℃
Ambient Humidity 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Storage Humidity 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Dust 0.1 mg/m³ or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure (altitude range) 800 to 1,114 hPa (2,000 m above sea level or less)
Vibration Resistance IEC/EN61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.] 9 to 150 Hz Fixed acceleration: 9.8 m/s² X, Y, Z directions for 10 cycles (100 min)
Concussion Resistance IEC/EN61131-2 compliant 147 m/s², X, Y, Z directions for 3 times
Noise Immunity Noise Voltage: 1,000 Vp-p Pulse Duration: 1 µs Rise Time: 1 ns (via noise simulator)
Electrostatic Discharge Immunity Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Grounding Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure Equivalent to IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*6
Installation Configuration Embedded panel
Cooling Method Natural air circulation
Weight Approx. 0.4 kg [0.9 lb] or less (display unit only)
External Dimensions W130 x H104 x D40 mm [W5.12 x H4.09 x D1.57 in.]
Panel Cut Dimensions W118.5 x H92.5 mm [W4.67 x H3.64 in.], Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*7
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the type of conditions that will be present in the GP's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].