LEWPLC

E2K-C25ME1 2M OMRON ราคา 3,800 บาท

฿3800.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Stock Project 2
รหัสสินค้า : 003415

รายละเอียดสินค้า E2K-C25ME1 2M OMRON ราคา 3,800 บาท

ylinder type sensing head size	dia. 34
Type	Unshielded
Sensing method	Capacitive type
Sensing distance	25 mm
Setting distance	3 to 25 mm
Differential distance	15% Max. of sensing distance(when adjusted to 25 mm +10% to -10% with standard object)
Sensing object	Conductor and dielectrics
Standard sensing object	With grounded metal 50501mm
Response frequency	70 Hz (average)
Power supply voltage	12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range	10 to 40 VDC
Current consumption	10 mA Max. (at 12VDC) 16 mA Max. (at 24VDC)
Control output (Output type)	NPN voltage-current output
Control output (Switching capacity)	0 to 200 mA
Control output (Residual voltage)	2 V Max. （under load current with cable length of 2m）
Indicator	Detection indicator(red)
Operation mode	NO
Sensitivity setting	15-turn adjustment(-3 to +3 turn)
Protective circuit	Surge suppressor Power supply reverse polarity protection
Standard or Different frequency	Standard
Ambient temperature	Operating: -25 to 70 CEL Storage: -25 to 70 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation)
Temperature influence	+-15% Max. of sensing distance in temperature range of -10 to +55CEL +-25% Max. of sensing distance in temperature range of -25 to +70CEL (As the basis for sensing distance of 23CEL)
Voltage influence	+-2% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP66
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-1 EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 CE marking: Equipped
Applicable standard (CCC mark)	Not equipped
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 200 g
Material (case)	Heat-resistant ABS resin
Material (sensing surface)	Heat-resistant ABS resin
Accessories	Instruction manual, Mounting bracket