|
System of common indicators |
|
|
Response frequency band |
X ≤ 100HZ |
|
Shield |
Shield |
|
Output Specifications |
DC 2-wire NO |
|
Protection class |
IP67 |
|
Set distance |
Detecting a distance of approximately 70% |
|
Hysteresis |
20% of sensing distance |
|
May object detection |
Magnetic metal (non-magnetic metal will reduce the detection distance.) |
|
Standard sensing object |
E2ES-X4D1: iron 30 × 30 × 1mm; E2ES-X8D1: iron 54 × 54 × 1mm |
|
Frequency response |
E2ES-X4D1: 12Hz; E2ES-X8D1: 8Hz |
|
Power supply voltage (voltage range) |
DC12 ~ 24V ripple (pp) 10% or less (DC10 ~ 30V) |
|
Leakage Current |
0.8mA or less |
|
(Control output) switching capacity |
3 ~ 100mA |
|
(Control output) residual voltage |
3V (load current 100mA, cable length 2m time) |
|
Display lights |
Operation indicator (red), set the display (green) |
|
Protection circuit |
Load short-circuit protection, surge absorber |
|
Ambient temperature |
When the action, Storage: 0 ~ +50 ℃(with no icing or condensation) |
|
Ambient humidity |
When the action, Storage: 35 ~ 95% RH (non-condensing) |
|
Effect of temperature |
Within a temperature range of 0 ~ +50 ℃+23 ℃when, ± 20% of sensing distance |
|
Effects of voltage |
Within ± 15% of the DC12/24V, rated supply voltage, the detection distance of ± 2.5% or less |
|
Insulation Resistance |
50MΩ less room (DC500V megger) charging unit and case |
|
Withstanding Voltage |
Inter-AC1, 000V 50/60Hz 1min charging unit and case |
|
Vibration (durable) |
Upper and lower amplitude 10 ~ 55Hz 1.5mm X, Y, Z directions for 2h |
|
Impact (durable) |
1,000 m / s 2 X, Y, Z directions for 10 times |
|
Protection structure |
IEC standard IP67 [JEM specifications IP67g (resistant to immersion type, oil type)] |
|
Connection |
Pre-wired (standard cable length 2m) |
|
Material |
Housing screw portion: SUS303 / wire leads: Brass; detection surface: SUS303; tighten the nut: Zinc Iron plating; Circlip: iron sub-lead plating |


This website uses cookies (Learn more) and has a privacy policy (Learn more).


