LEWPLC

QD62 MITSUBISHI ราคา 10000 บาท

฿10000.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Stock Project 2
รหัสสินค้า : 003350

รายละเอียดสินค้า QD62 MITSUBISHI ราคา 10000 บาท

(Sink) 40-pin connector transistor output: 2 channel 200/100/10kpps count input signal: DC5/12/24V external input: DC5/12/24V match output

Summary

It is a high-speed counter unit that performs a count of the pulse train of high speed.
It is possible to perform control such as positioning in combination with an external encoder.

32-bit counting range

Has two channels equipped with input channels, counting 32-bit signed binary (-2147483648 to 2147483647) It is possible to independently.

Switching function of the counting rate

Switching highest counting speed is possible, and count is up to the pulse of a gentle low-frequency rise / fall from a high-speed pulse.

Selection of input method

You can select the input method of phase 1 1x / 1 phase 2 multiplication / 2 phase 1x / 2 phase multiplied by 2/2 phase 4 multiplication / CW / CCW.

Selection of counter format

I can select the counter any form of ring counter form or linear counter format.

Function interrupt to the CPU unit

When it reaches a count value set in advance, it can be an interrupt signal to the CPU unit to activate the interrupt program.

Counter selection function

It is possible to select one using the functions from the counter four different functions.

Function control from the external terminal

By applying a voltage to the preset terminal / function start terminal of the external terminal, preset function / counter function selection can be executed.

Ease of maintenance

Detect the fuse interruption of external output unit, and the input signal X, I will inform on the display LED on the unit.

Number of Channels

2 channel

Counting speed switching setting

200k (100k ~ 200kpps), 100k (10k ~ 100kpps), 10k (10kpps below)

Count input signal

Phase

(1x / 2 multiplication / 4 multiplication), CW / CCW input (1x / 2 multiplication), 2-phase input 1 phase input

Signal level (φA, φB)

DC5/12/24V 2 ~ 5mA

DC24V input

ON voltage / ON current

21.6 ~ 26.4V / 2 ~ 5mA

OFF voltage / OFF current

Less than 5V / 0.1mA or less

DC12V input

ON voltage / ON current

10.8 ~ 13.2V / 2 ~ 5mA

OFF voltage / OFF current

4V and lower / 0.1mA or less

DC5V input

ON voltage / ON current

4.5 ~ 5.5V / 2 ~ 5mA

OFF voltage / OFF current

Below 2V / 0.1mA or less

Counter

Counting speed (up to)

200kpps, 100kpps, 10kpps

Count range

32-bit signed binary (-2147483648 to 2147483647)

Model

UP / DOWN preset counter + ring counter function

(With 50% duty cycle) count minimum pulse width

2-phase input 5μs (ON / OFF each 2.5μs), minimum phase difference:: 200kpps 1.25Myuesu
2-phase input 10μs (ON / OFF each 5μs), minimum phase difference:: 100Kpps 2.5us
10Kpps: 100 microseconds (ON / OFF each 50μs), minimum phase difference 2-phase input: 25μs

Match detection

Comparison range

32-bit signed binary

Comparison result

Setting value <count value
setting = count value
setting> count value

External input

Preset

DC5/12/24V 2 ~ 5mA

Function start

DC5/12/24V 2 ~ 5mA

External output

Match output