| Rated supply voltage | 12 to 48 VDC Permissible ripple: 20% max. |
|---|---|
| Operating voltage range | 85% to 110% of rated supply voltage |
| Power consumption |
Approx. 2.5 W (at 48 VDC) Note: Inrush current will flow for a short time when the power supply is turned ON. Inrush Current (Reference Values) 1.2 A (peak value) (Applied voltage: 52.8 VDC, Time: 3 ms) |
| Time ranges (Number of ranges) | 1 |
| Time ranges | 0.01 s to 99.99 s |
| Select method | Thumbwheel Switch |
| Input signals | Reset, Gate |
| Input method | No-voltage input |
| Minimum input signal width | 20 ms (Reset, Gate) |
| Output modes | N (Power ON delay) |
| Control output (Contact output) |
Type: SPDT Switching capacities (Resistive load): 3 A at 250 VAC/3 A at 24 VDC Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC ( L/R=7 ms) Minimum applicable load: 10 mA at 5 VDC (failure level: P) |
| Reset system | Power reset, External reset |
| Power reset | Minimum power-opening time: 0.5 s |
| Timer mode | UP display timer (increments form 0 to the set time) |
| Display method | 7-segment LEDs |
| Digit | 4 digits |
| Character height |
Present value: 8 mm (Red) Zero suppression: Not equipped |
| Ambient temperature |
Operating: -10 to 55 CEL (with no icing or condensation) Storage: -25 to 65 CEL (with no icing or condensation) |
| Ambient humidity |
Operating: 35 to 85% RH Storage: 35 to 85% RH |


This website uses cookies (Learn more) and has a privacy policy (Learn more).



