LEWPLC

E3S-CT11 2M OMRON ราคา 7000 บาท

฿7000.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Photoelectric E3--
รหัสสินค้า : 002973

รายละเอียดสินค้า E3S-CT11 2M OMRON ราคา 7000 บาท

Sensing method	Through-beam
Sensing distance	0 m to 30 m
Standard sensing object	Opaque: 15 mm dia. Min.
Directional angle	Emitter:3 to 15 DEG Receiver:3 to 15 DEG
Light source	Infrared LED (880nm)
Power supply voltage	10 to 30 VDC (ripple(p-p) 10% included)
Current consumption	Emitter: 25mA DC Max., Receiver: 25mA DC Max.
Control output (Output type)	NPN/PNP open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor Output short-cut protection Power supply reverse polarity protection
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp:5000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: -25 to 55 CEL Storage: -40 to 70 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 2000 Hz, 1.5-mm or 300m/s2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance	1000m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67 Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Light indicator(red), Stability indicator(green), Power indicator(red)
Weight (packed state)	approx. 270 g
Tightening torque	1.18 N.m Max. (with M4 screw)
Material (case)	Zinc diecast
Material (lens)	Methacrylate resin
Material (cover)	Polyethyl sulfon
Material (mounting bracket)	Stainless steel(SUS304)
Accessories	Instruction manual, Mounting bracket(with screws), Adjustment driver